1、玻璃钢屋顶风机工作的地方要时常保持最干净的状态，其表面也要维持干净，在机器的进口以及出口处，不要出现脏东西。我们要每隔一段时间，就对屋顶轴流风机以及里面的尘埃进行简单的清理。

1, the place where the fan works on FRP roof should always keep the cleanest condition. Its surface should also be kept clean. No dirty things should be found at the inlet and outlet of the machine. We have to simply clean up the air blower and the dust in the roof every other time.

2、要储存在比较干的环境里，不要让它去潮湿的地方。如果你把它放在室外，要注意日常的抵御方法。在挪动风机的时候要轻拿轻放，避免不必要的损害。

2, to store in a relatively dry environment, do not let it go to wet places. If you put it outside, pay attention to the daily resistance. When the fan is moved, it should be taken lightly to avoid unnecessary damage.

3、玻璃钢屋顶风机在工作过程中，如果发现机器里有不正常的声音、电动机烫手、表面电人、无法开启等情况时，要及时停止工作然后对风机进行检测。严禁在屋顶轴流风机还在工作时进行维护，修好后，要试着运行风机10分钟，确保没有异常情况时方可重新恢复工作。

3, during the working process of the FRP roof fan, if there is abnormal sound in the machine, hot motor, surface electricity and no opening, etc., we must stop working in time and detect the fan. It is strictly prohibited to maintain the roof axial fan when it is working. After repair, try to run the fan for 10 minutes, and make sure that it can be resumed when there is no abnormal condition.