联系我们
公司名称：XXX
电话：XXX
手机：XXX
联系人：XXX
地址：XXX
新闻动态
玻璃钢离心风机是
玻璃钢离心风机是依靠输入的机械能，提高气体压力并排送气体的机械，它是一种从动的流体机械。玻璃钢离心风机的工作
The GFRP centrifugal fan is a kind of driven fluid machinery, which
relies on the mechanical energy of the input and increases the pressure
of gas and discharge the gas. The work of GFRP centrifugal fan
原理与透平压缩机基本相同，只是由于气体流速较低，压力变化不大，一般不需要考虑气体比容的变化，即把气体作为不可压缩
The principle is basically the same as that of a turbo compressor.
Only because the gas velocity is low and the pressure changes little, it
is generally not necessary to consider the change of gas specific
volume, that is, the gas is incompressible.
流体处理。玻璃钢离心风机是以优质碳素钢为骨架，以特定工艺加工的聚脂玻璃钢进行复合制作，它具有全玻璃钢风机的耐腐蚀
Fluid treatment. FRP centrifugal fan is made of high quality carbon
steel skeleton and made of polyglass FRP made by special technology. It
has corrosion resistance of all FRP fan.
和钢质风机的结构强度。用于工厂及大型建筑物的室内通风换气，也可用于消烟除尘及锅炉鼓风等。既可用作输入气体，也可用
And the structural strength of the steel fan. It is used for indoor
ventilation and ventilation for factories and large buildings, and can
also be used for smoke and dust removal and boiler blast. It can be used
as an input gas and is also available